Philips Universal Remote RC144 5302 User Manual

GE  
3635  
You are probably already  
familiar with most of the keys  
on the remote; however, there  
may be a few which are new to  
you.  
try the next code in the list for  
your brand of TV.  
when you are in STB or DVD  
modes. (However, the Volume  
Keys will always control the  
AUX device when in AUX  
mode.) This is the way most  
people will want the remote to  
work. However, you can  
change how the Volume Keys  
work.  
The original setting for the  
Power key depends on which  
remote you have. (Please  
check the Play / Pause key on  
your remote to see which  
remote you have.)  
SWITCHING MODES  
THE POWER KEY  
STEP 1 - INSTALL  
BATTERIES  
VERIZON FIOS TV  
REMOTE CONTROL  
STEP 3 - PROGRAM  
YOUR REMOTE  
Harman/Kardon  
0137, 0216, 0918, 1331, 1333,  
3626, 3636, 3699  
Press a Device Key on top of  
the remote to switch modes.  
For example, to control your  
DVD player, press DVD. To  
return to your FiOS TV STB  
box, press STB. Pressing the  
TV, DVD or AUX key is like  
picking up the remote for that  
device.  
When you are in STB mode,  
the Power key can be  
programmed to turn on/off just  
the STB or the STB together  
with other devices.  
Hitachi  
Integra  
JBL  
1828  
To program the remote to  
control a VCR or DVD player,  
press and hold the DVD key,  
instead of the TV key, in step 4  
and 5. To program an audio  
receiver, press and hold AUX  
instead.  
Note: You can assign a DVD or  
VCR to the DVD key. The AUX  
key is reserved for audio  
receivers, amplifiers and VCR.  
0162, 1325, 1347  
0137, 1333, 3626, 3752  
Install two new AA batteries.  
Make sure they are oriented  
correctly. To test if the  
batteries have been installed  
correctly, press a few keys on  
the remote. One of the Device  
Keys [DVD, AUX, TV, STB] on  
the top of the remote will flash  
briefly when you press a key.  
Your new remote control  
comes from the factory ready  
to control your FiOS TV  
JVC  
1401, 1522, 3618, 3659, 3668,  
3686, 3695, 3706, 3712, 3713,  
3715, 3729, 3737, 3738  
Options displays extra  
options or provides help  
based on what you are  
doing.  
service. However, VOL+, VOL-  
and MUTE will not work until  
you program the remote with  
the brand of TV you have. In  
addition to your STB and TV,  
your remote can also control  
two additional devices, for  
example, a DVD player and an  
audio receiver.  
This is called “programming  
the remote.” If you don’t want  
to control devices other than  
your FiOS TV STB, you do not  
need to program the remote.  
Kenwood  
1340, 1596, 1597, 3619, 3646,  
3649, 3656, 3658, 3675, 3688  
The Power key  
controls only the  
selected mode.  
If you want the Power Key to control  
multiple devices with a single power  
key press…  
KLH  
1417, 1455  
1393, 3749  
3758  
If you always want the Volume Keys  
to control the AUX device …  
Koss  
Favorites displays your list  
of favorite channels. (The  
first time you press the key,  
you will be invited to set up  
your favorite channels.)  
Lexicon  
LG  
1. Press and hold the STB  
key.  
2. While holding down the  
STB key, press OK.  
3. Release both keys. The  
Device Keys will blink twice.  
4. Press 9 - 7 - 7. The STB  
key will blink twice.  
5. One after the other, press  
each Device Key you want  
the Power Key to control in  
the order you want them to  
turn on or off.  
1320  
Note: When you press Guide,  
Widgets, On Demand,  
Favorites, FiOS TV, or DVR  
the remote assumes you want  
to control the STB and will  
automatically switch you to  
STB mode.  
Some people may want to  
always adjust the volume using  
their AUX device (typically a  
home theater receiver)  
regardless of the mode they  
are in.  
Linn  
0216, 3636  
The Power key  
controls both STB and  
TV in STB mode.  
Magnavox  
0216, 0558, 1216, 1296, 1541,  
3636  
STEP 2 - GET TO KNOW  
YOUR REMOTE  
Note: The remote will exit  
programming mode after 20  
seconds if no key is pressed.  
Marantz  
0216, 1216, 1296, 1316, 3636,  
3727  
On Demand displays a list  
of movies and other types  
of programs you can watch  
at any time.  
McIntosh  
3759  
Your remote is now ready to  
control your FiOS TV Set Top  
Box (STB). To start, try the  
following.  
Mitsubishi  
1420, 3708  
WHAT IF NONE OF THE  
CODES WORKED?  
Codes for Audio Amplifiers  
1. Press and hold the STB  
key.  
2. While holding down the  
STB key, press OK.  
3. Release both keys. The  
Device Keys will blink twice.  
4. Press 9 - 5 - 5. The STB  
key will blink twice.  
5. Press AUX. The AUX key  
will blink 3 times to indicate  
success in programming.  
NAD  
3637  
BOSE  
0701  
Nakamichi  
Onkyo  
3638, 3639  
Press Widgets to access  
local weather, traffic and  
other information.  
OPTIONAL: Reprogram  
How the Channel,  
Volume and Power  
Keys Operate  
Curtis Mathes  
Denon  
0327  
0162, 0869, 1325, 1347, 1558,  
3628, 3650, 3653, 3660, 3666,  
3669, 3687, 3693, 3697, 3705,  
3707, 3710, 3711, 3719, 3753  
3777  
Make sure the remote has a  
clear, direct and unobstructed  
view of any device you want to  
control.  
HOW TO PROGRAM YOUR  
REMOTE  
If none of the codes worked,  
try the following procedure. (As  
before, we will use the  
example of a TV. For other  
devices use the appropriate  
Device Key instead of the TV  
key in step 2 and 3.)  
GE  
0105  
Harman/Kardon  
JBL  
0919  
6. Press OK when done. The  
STB key will blink 3 times to  
indicate success in  
Optimus  
Oritron  
0558, 0697, 1050, 1101, 3634  
1393  
3781  
If you have a STB with a built  
in DVR…  
JVC  
0358  
We will use the example of  
programming your remote to  
control a TV. The procedure is  
the same for DVD players and  
audio receivers.  
Panasonic  
1315, 1335, 1343, 1545, 1575,  
1660, 1790, 1791, 3629, 3630,  
3667, 3683, 3701, 3723, 3728,  
3731, 3732, 3733, 3734, 3736,  
3742, 3743, 3745, 3746, 3747,  
3750  
Left Coast  
Lexicon  
Marantz  
McIntosh  
Optimus  
Parasound  
Philips  
0919  
THE CHANNEL KEYS  
3784  
Turn on your TV.  
programming.  
0919, 3778  
displays your list of  
recorded programs.  
Press the STB key on the  
top of the remote to make  
sure you are in FiOS TV  
“STB Mode.”  
CH+, CH- and Last control the  
Set Top Box (STB) even after  
you press the TV, DVD or AUX  
Device Key. This is the way  
most people will want the  
remote to work. However, you  
can change the way the  
Channel Keys work so that  
when you press a Device Key,  
the Channel Keys will operate  
the selected device.  
3785  
For example, to program the  
Power Key to turn on or off  
your TV, AUX and STB, in that  
order, with one press of  
Power, press [STB+OK],  
[9-7-7], [TV], [AUX], [STB],  
[OK].  
0327  
1. Turn on your TV.  
Philips  
0216, 1216, 1293, 1296, 3636,  
3698, 3749  
3782  
2. Press and hold the TV key.  
3. While holding down the TV  
key, press OK.  
4. Release both keys. The  
Device Keys will blink twice.  
5. Press 9 - 2 - 2.  
Note: To return to controlling  
the volume via the TV, press  
TV in step 5. If you want to  
control the volume through any  
device (by pressing a Device  
Key, then a Volume Key),  
press OK in step 5. This will  
also control the volume of your  
STB in STB mode.  
1. Look up your TV make in  
the TV code listing on the  
other side of this sheet.  
2. Circle the first 4-digit  
number displayed for your  
make of TV.  
0919  
is a rocker button,  
Pioneer  
0041, 0177, 0558, 0657, 1050,  
1411, 3607, 3608, 3625, 3644,  
3645, 3652, 3654, 3677, 3678,  
3679, 3689, 3690, 3722, 3740  
Pioneer  
Polk Audio  
RCA  
0040, 0327, 3775  
Press the CH+ key to see  
0919  
press the lower half of the  
the next higher channel.  
0327  
Polaroid  
Polk Audio  
Proscan  
RCA  
3605  
Sony  
0716  
button  
program. Press upper half  
of the button to  
to pause the  
Press 5 - 0 then OK to tune  
0216, 1316, 3726  
1281, 3635  
Soundesign  
Soundmatters  
Victor  
0105  
to channel 50.  
3783  
6. Point the remote at the TV.  
If you find that your devices do  
not always turn on or off  
together as expected, then you  
should program your remote to  
control only one device at a  
time.  
3. Turn on your TV.  
Press Last to return to the  
0558, 1050, 1101, 1281, 1417,  
1538, 3609, 3620, 3635, 3748  
0358  
4. Press and hold the TV key.  
5. While holding down the TV  
key, press the OK key.  
6. Release both keys. The  
Device Keys will blink twice.  
7. Enter the 4-digit TV code  
you circled. The TV key will  
blink 3 times.  
8. To test to see if this was the  
correct code, point the  
remote at your TV and  
press Power. If the TV  
turns off, you have  
successfully programmed  
your remote.  
9. If the TV did not turn off,  
repeat all the steps with the  
next code in the list.  
10.For future reference,  
underline the code that  
worked for you.  
last channel.  
Wards  
0040, 0105  
7. Press  
8. Press  
press  
.
continue to play from where  
you left off.  
Rotel  
3760  
Yamaha  
0160, 0381, 3776, 3779, 3780  
Press Info to see  
. Every time you  
the remote  
RCA & Dimensia  
Rio  
3610, 3611, 3612, 3613, 3635  
1896  
If you want the Channel Keys to  
control different devices …  
information about the  
RE-SETTING THE REMOTE  
jumps back a few  
seconds in the program you  
are watching.  
Codes for Audio Receivers  
current program. Press Exit  
to return to TV watching.  
Samsung  
Sansui  
1322, 1527, 3720, 3755  
0216, 3636  
sends out a new power-off  
command to the TV. Keep  
ADC  
0558  
3725  
1. Press and hold the STB  
key.  
Adcom  
Aiwa  
Note: All previous programming  
will be lost.  
If you want the Power Key to control  
only one device at a time…  
Sanyo  
1496, 1828  
0148, 0216, 1415, 1432, 1668,  
3614, 3615, 3616, 3617, 3627,  
3636, 3670, 3680, 3718  
Press Guide to see a list of  
TV programs. Press Exit to  
return to TV watching.  
pressing  
until the TV  
Sherwood  
Sonic Blue  
Sony  
1104, 3632, 3724  
1896  
If you are watching a  
2. While holding down the  
STB key, press the OK key.  
3. Release both keys. The  
Device Keys will blink twice.  
4. Press 9 - 6 - 6. The STB  
key will blink twice.  
5. Press OK. The STB key will  
blink 3 times to indicate  
success in programming.  
turns off. (You can press  
recorded program,  
jumps forward in the  
program.  
to go back.)  
9. When the TV turns off, you  
have found the right code.  
Press OK to store this  
code.  
To power any device, you will  
need to press the appropriate  
Device Key, then the Power  
Key.  
1085, 1285, 1468, 1585, 1685,  
1785, 1786, 1885, 3606, 3621,  
3622, 3631, 3640, 3641, 3642,  
3643, 3648, 3651, 3657, 3671,  
3672, 3673, 3674, 3684, 3685,  
3714, 3716, 3717, 3730, 3735,  
3739, 3744  
Alco  
1417  
To reset the remote to the  
original setting, do the  
following steps.  
Amphion Media Works1590, 1642  
Press the Menu key to  
launch the FiOS TV Main  
Menu. From the Main Menu  
you can access all the  
features of your FiOS TV  
service.  
AMW  
1590, 1642  
Model: RC144 5302 / 00B  
Anam  
1101  
Anthem  
Apex Digital  
Audiotronic  
Audiovox  
BOSE  
3757  
records the current  
program.  
For additional information  
about your FiOS TV service  
and your remote, go to  
1. Press and hold the STB  
key.  
1457  
1. Press and hold the STB  
key.  
2. While holding down the  
STB key, press OK.  
3. Release both keys. The  
Device Keys will blink twice.  
4. Press 9 - 7 - 7. The STB  
key will blink twice.  
5. Press OK. The STB key will  
blink 3 times to indicate  
success in programming.  
Soundesign  
Sunfire  
0697  
1216  
Note: There are over 300 TV  
and DVD codes. The most  
common codes are tried first,  
but you may still need to press  
over 300 times to find the  
right code. If you reach the end  
of the list of codes the entire  
remote will flash twice and  
return to normal operation. You  
can exit programming at any  
time by pressing Exit.  
1340  
2. While holding down the  
STB key, press OK.  
3. Release both keys. The  
Device Keys will blink twice.  
4. Press 9 - 0 - 0. The STB  
key will blink 3 times to  
indicate success in  
1417, 3754  
Teac  
1101, 1417  
0666, 1256, 1280, 1960, 3741  
Press  
,
, , and keys  
Technics  
1335, 1545, 3629, 3630, 3661,  
3665, 3667  
Capetronic  
Carver  
0558  
Note: To return to controlling  
the channel via the STB only,  
press STB in step 5.  
to navigate through this  
For video instructions, press  
the Menu key on your remote  
then select Help on the Main  
Menu  
0216, 1216, 3636  
3664  
Thorens  
Venturer  
Wards  
1216  
menu. We suggest that you  
become familiar with all the  
options on the Main Menu.  
To select any item, press  
OK. Press Exit at any time  
to return to TV watching.  
Classic  
1417  
Coby  
3751  
0041, 0216, 3625, 3636  
Denon  
1387, 3602, 3633, 3662, 3663,  
3676, 3681, 3682, 3691, 3694,  
3700, 3702, 3703, 3704, 3709,  
3721  
Yamaha  
0162, 0203, 1203, 1303, 1358,  
1402, 3600, 3601, 3604, 3623,  
3624, 3625, 3647, 3655, 3692,  
3696, 3756  
THE VOLUME KEYS  
programming.  
Note: If some of the keys on  
the remote do not operate your  
TV as you would expect, then  
Verizon Customer Support  
888-553-1555  
VOL+, VOL- and Mute always  
control the TV volume even  
Emerson  
Fisher  
3603  
1828  
Zenith  
1320  
 

Philips Security Camera NP2900 User Manual
Philips Stereo Amplifier BGD906 User Manual
Philips Universal Remote SBC RU930 User Manual
Philips Work Light Ballasts For Fluorescent Lamps User Manual
Philips Work Light HPL 4 Pro User Manual
Pioneer Stereo Receiver HGW4 User Manual
Polk Audio Speaker System SDA User Manual
Poulan Blower 115351127 User Manual
Poulan Snow Blower 420904 User Manual
Poulan Trimmer SV 30 User Manual