Philips Universal Remote REM110 User Manual

Thank you for purchasing a Philips Magnavox 3 device univer-  
sal remote control. This universal remote control will operate  
your Television,Video Cassette Recorder, and Cable Converter  
Box. Before you can use your new remote control, you will  
need to program it to operate the specific components you  
wish to control. This remote features:  
Channel Scan, a convenient way to "channel surf"  
by scanning channels.  
Auto Scan code search to help program remote  
control for a variety of components, including  
older/discontinued models.  
REM110  
Universal Remote  
Built-in Sleep Timer.  
Controls for basic functions, including Power,  
Channel Selection,Volume, Play and Record.  
KEYS AND FUNCTIO NS  
2
1
3
5
8
4
7
4
6
3
9
9
11  
10  
12  
12  
14  
13  
2
 
Punch Through  
Program m ing W ith Auto Scan  
The VCR Transport keys (e.g., REW, PLAY, FFW D, REC, STO P,  
AND PAUSE) are set at the factory to control the VCR even if TV or  
CBL is the selected mode. In other words,VCR control "punches  
through" regardless of what mode is on. Moreover, you do not have to  
press VCR before pressing the mode key.  
If your component does not respond to the remote control after try-  
ing all codes listed for your brand, or if your brand is not listed at all,  
try searching for your code using Auto Scan. For example, to search  
for a code for a TV:  
1.  
On the remote control, press TV once.  
Sleep Feature  
2.  
Press and hold SET until the red light blinks twice, then  
release SET.  
Press SLEEP key to activate your components internal sleep timer.  
(May not be available for all components.) If the component does not  
have a sleep function, the first press of the SLEEP key activates the  
remotes built-in sleep timer. Timer can be set to a maximum of 90  
minutes.  
3.  
4.  
Aim the remote control at the TV and press SCAN. The  
red light will blink twice.  
Continue aiming the remote control at the TV (which  
may take up to 5 minutes) until it turns off. Immediately  
press any key except VO L-, SCAN, or SET.  
To Set the Rem otes Built-in Tim er  
If SCAN is pressed again after any key stops Auto Scan, the remote  
will continue Auto Scan of the next ID from where it stopped.  
1.  
Press SLEEP key once, 15 minute timer is set. Red light  
blinks once.  
If you have passed by the code that turns off the TV, press VO L- one  
2.  
Additional key presses within 10 seconds will increase  
the timer value in 15 minute increments up to a maxi-  
mum of 90 minutes. For each press of the SLEEP key,  
the red light will blink to indicate how many 15 minute  
increments have been programmed, e.g., one blink for  
first press, two blinks for the second press, etc. Sleep  
timer activates 10 seconds after the last press of the  
SLEEP key. The red light will blink once every 15 sec-  
onds to indicate that the timer is running.  
or more times until the TV turns on again.  
5.  
6.  
To lock in the code and exit Auto Scan, press and release  
SET the red light will blink twice.  
To search for codes of other components, repeat steps 2  
through 5, but substitute the appropriate key (e.g.,VCR,  
CBL) for the (VCR or Cable) component you are search-  
ing for.  
NOTES: In the search mode, the remote will send IR (infrared)  
codes from its library to the selected device, starting with the most  
popular code first.  
NOTE: Once the sleep timer is running, the sleep timer is automati-  
cally canceled if any other key is pressed. The remote IR must be  
pointed to the component to turn off component when timer ends.  
Checking the Auto Scan Codes  
If you have set up the remote control using Auto Scan, you can now  
find out which four-digit code is operating your component:  
To Activate Built-in Sleep Tim er if com ponent has  
Sleep function  
1.  
2.  
3.  
On the remote control, press a component key once  
(e.g., TV,VCR, CBL).  
1.  
2.  
3.  
On the remote control, press a component key once  
(e.g., TV,VCR,CBL).  
Press and hold SET until the red light blinks twice, then  
release SET.  
Press and hold SET until the red light blinks twice, then  
release SET.  
Enter 9-9-0. The red light will blink twice.  
Enter 9-7-0. The red light will blink twice.  
4.  
To view the code for the first digit, press 1 once. Wait  
3 seconds, count the red light blinks (e. g., 3 blinks = 3)  
and write down the number.  
4.  
Follow instructions above to Set Timer.  
To reset to component Sleep function follow steps 1 through 3 above.  
At the end of step three, the red light will blink four times to indicate  
the remote is reset to component Sleep function.  
NOTE: If a code digit is "0" , the red light will not blink.  
5.  
Repeat step 4 three more times for remaining digits. Use  
2 for the second digit, 3 for the third digit and 4 for the  
fourth digit.  
6.  
To find codes of other components, repeat steps 1  
through 5, but substitute the appropriate key (e.g., VCR  
or CBL) for the component you are checking. As  
before, write down each four-digit code.  
ABO UT OTHER FEATURES  
Volum e Lock  
The remote control is set at the factory to control the volume inde-  
pendently while in the TV,VCR, and CBL modes.  
To control the volume from one mode (e. g., TV) while in another  
mode (e.g., VCR or CBL), perform the instructions below to lock the  
volume setting.  
1.  
On the remote control, press TV once.  
2.  
Press and hold SET until the red light blinks twice, then  
release SET.  
3.  
Press VO L+. The red light will blink twice.  
5
6
 
Q UICK FEATURES SETUP GUIDE  
TRO UBLESHO OTING  
PRO BLEM:  
This guide is provided here for your convenience as a quick refer-  
ence for performing remote control sequences.  
SO LUTIO N:  
Red Indicator Light does not  
blink when you press a key.  
Replace the batteries with two  
(2) "AA" alkaline batteries (see  
Page 4).  
Component Setup  
#
#
#
#
x 2  
The VO L+,VO L- and MUTE  
keys are not functional.  
Make sure that the volume con-  
trol is locked to a component  
that has volume capabilities and is  
programmed into the remote  
control.  
x 2  
Turn on  
component  
(e.g., TV).  
Press component  
key once  
(e.g., TV).  
Press SET  
until Red Light  
blinks twice;  
release SET.  
Enter 4-digit code Press POWER  
for your brand;  
Red Light blinks  
twice after last #. repeat steps  
with next code.  
once; if no  
response,  
1
2
3
4
5
Red Indicator Light blinks when  
you press a key, but home enter-  
tainment component does not  
respond.  
Make sure you are aiming the  
remote control at your home  
entertainment component and  
that you are within 15 feet of the  
component you are trying to  
control.  
Auto Scan  
x 2  
x 2  
Turn on  
component  
(e.g., TV).  
Press component  
key once  
(e.g., TV).  
Press SET  
Aim remote at  
Press SET  
until Red Light component; press until Red Light  
blinks twice;  
release SET.  
SCAN once. When blinks twice;  
off, press any  
key* to stop.  
release SET  
to lock code.  
* NOTE: Not VOL-, SCAN, or SET.  
1
2
3
4
5
The remote control does not  
control home entertainment  
components or commands are  
not working properly.  
Try all listed codes for the com-  
ponent brand being set up. Make  
sure all components can be oper-  
ated with an infrared remote  
control.  
Code Verification  
x 2  
x 2  
CH+, CH- and LAST do not  
work for your RCA TV.  
Due to an RCA design (1983-  
1987), only the original remote  
control will operate these func-  
tions.  
Press component  
key once  
(e.g., TV).  
Press SET  
until Red Light  
blinks twice;  
release SET.  
Enter 9-9-0;  
the Red Light  
will blink twice.  
Press 1 once for 1st digit.  
Wait 3 sec. and count blinks.  
Number of blinks equals  
value of code digit.  
Repeat with 2, 3, and 4.  
1
2
3
4
Changing channels does not  
work properly.  
If original remote control  
required pressing ENTER to  
change channels, to change chan-  
nels, press ENTER on the  
remote after entering a channel  
number.  
Volume Lock  
x 2  
Press component*  
key once (e.g., CBL).  
Press SET  
until Red Light  
blinks twice;  
release SET.  
Press VOL+ once.  
Volume now controlled  
through component  
selected in step 1.  
* NOTE: Component must have  
volume capabilities.  
Tried Auto Scan and still could  
not find a working code.  
Try Auto Scan again after clearing  
out the component key as fol-  
lows: Press and hold SET until  
Red Light blinks twice, then  
1
2
3
release. Next enter 9-9-2. Then  
press and release the component  
key to be cleared twice.  
NOTE: To clear all set up codes and restore functions to Default,  
press SET until red light blinks twice, release SET and enter 9-8-1.  
Caution:When this clear feature is performed, please note that all of  
your set up codes will be reset to the default codes and you will need  
to reprogram components.  
7
8
 
Inteq  
0046  
SETUP CO DES FO R TELEVISIO N  
CÓDIGOS DE PROGRAMACIÓN PARA TELEVISIÓN  
CODES DE PROGRAMMATION DU TÉLÉVISEUR  
JBL  
0083  
JCB  
0029  
AOC  
0048, 0059  
0122, 0492  
0121  
JVC  
0082  
Admiral  
Aiko  
KEC  
0209  
KTV  
0059, 0209  
Akai  
0059  
Kenwood  
LG  
0048, 0059  
Alaron  
0208  
0085  
America Action  
Anam  
0209  
LXI  
0076, 0083, 0183, 0185, 0207  
0045  
0209  
Logik  
Audiovox  
Baysonic  
Belcor  
0121, 0209, 0480  
0209  
Luxman  
MGA  
0085  
0048, 0059, 0179, 0207  
0048, 0059, 0085, 0089  
0059, 0083*, 0208  
0045  
0048  
MTC  
Bell & Howel  
Bradford  
Brockwood  
Broksonic  
CXC  
0045, 0183  
0209  
Magnavox  
Majestic  
Marantz  
Matsushita  
Megatron  
Memorex  
0048  
0059, 0083  
0265, 0492  
0209  
0279  
0174, 0207  
Candle  
0059, 0085  
0059  
0045, 0085, 0179, 0183, 0207,  
0279, 0492  
Carnivale  
Carver  
Midland  
Minutz  
Mitsubishi  
Motorola  
Multitech  
NAD  
0046, 0076, 0080  
0050  
0083  
Celebrity  
Cineral  
0029  
0048, 0122, 0179, 0207  
0122  
0121, 0480  
0059, 0085, 0089, 0121  
0085  
Citizen  
0209  
Concerto  
Contec  
0185, 0195, 0207  
0048, 0059, 0085  
0121  
0209  
NEC  
Craig  
0209  
NTC  
Crosley  
Crown  
0083  
Nikko  
0059, 0121, 0207  
0209  
0209  
Onwa  
Curtis Mathes  
0045, 0059, 0076, 0080, 0083,  
0085, 0089, 0122, 0174, 0183,  
0195, 0480  
Optimus  
Optonica  
Orion  
0183, 0195, 0279  
0122  
Daewoo  
Daytron  
Denon  
0048, 0121, 0480  
0048  
0208, 0265, 0492  
0080, 0279  
Panasonic  
Penney  
0174  
0048, 0050, 0059, 0076, 0080,  
0085, 0089, 0185, 0207  
Dumont  
Electroband  
Emerson  
0046, 0048  
0029  
Philco  
Philips  
Pilot  
0048, 0059, 0083, 0174, 0492  
0048, 0183, 0207, 0208, 0209,  
0265, 0492  
0083  
0048, 0059  
0195  
Envision  
Fisher  
0059  
Pioneer  
Portland  
Prism  
0183  
0048, 0121  
0080  
Fujitsu  
Funai  
0208  
0200, 0208, 0209  
0209  
Proscan  
Proton  
Pulsar  
0076  
Futuretech  
GE  
0207  
0050, 0076, 0080, 0122, 0207,  
0480  
0046, 0048  
0080, 0279  
Quasar  
RCA  
Gibralter  
0046, 0048, 0059  
0048, 0059, 0085, 0207  
0082, 0085  
0208, 0209  
0207  
0048, 0076, 0080, 0119, 0122,  
1476  
GoldStar  
Gradiente  
Grunpy  
Radio Shack  
Realistic  
0048, 0059, 0076, 0085, 0183,  
0207, 0209  
Hallmark  
Harley Davidson  
Harman/Kardon  
Harvard  
0048, 0059, 0085, 0183, 0207,  
0209  
0208  
Runco  
SSS  
0046, 0059  
0048, 0209  
0059  
0083  
0209  
Sampo  
Hitachi  
0045, 0085, 0174  
0083  
Infinity  
* Default code  
9
10  
 
Samsung  
Sansei  
Sansui  
Sanyo  
0048, 0059, 0085, 0089, 0207  
Canon  
0064  
0480  
Carver  
0110  
0492  
Cineral  
0307  
0183  
Citizen  
0066, 0307  
Scimitsu  
Scotch  
Scott  
0048  
Colt  
0101  
0207  
Craig  
0066, 0076, 0101, 0269, 0300  
0048, 0207, 0208, 0209, 0265  
Curtis Mathes  
Cybernex  
Daewoo  
Denon  
0064, 0089, 0191  
0269  
Sears  
0076, 0083, 0085, 0183, 0185,  
0200, 0207, 0208  
0074, 0307  
0071  
Semivox  
Semp  
0209  
0185  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
0029  
Sharp  
0122  
0066  
Shogun  
0048  
0066  
Signature  
Sony  
0045  
0061  
0029  
Emerson  
0029, 0031, 0066, 0072, 0150,  
0213, 0238, 0307  
Soundesign  
Squareview  
Starlite  
0207, 0208, 0209  
0200  
Fisher  
0076, 0133  
0064  
0209  
Fuji  
Supreme  
Sylvania  
Symphonic  
TMK  
0029  
Funai  
0029  
0059, 0083  
0200  
GE  
0064, 0077, 0089, 0269  
0029  
Garrard  
GoldStar  
Gradiente  
HI-Q  
0085, 0207  
0122  
0066  
Tandy  
0029  
Technics  
Technol Ace  
Techwood  
Teknika  
0080, 0279  
0208  
0076  
Harley Davidson  
Harman/Kardon  
Harwood  
Hitachi  
0029  
0080, 0085  
0110  
0045, 0048, 0083, 0085, 0089,  
0121, 0179, 0208, 0209  
0101  
0029, 0071  
0071  
Telefunken  
Toshiba  
0085  
Hughes Network Systems  
JVC  
0089, 0183, 0185  
0059  
0096  
Vector Research  
Victor  
KEC  
0066, 0307  
0101  
0082  
KLH  
Vidikron  
Vidtech  
0083  
Kenwood  
Kodak  
0096  
0048, 0207  
0064, 0066  
0066  
Wards  
0045, 0048, 0050, 0059, 0083,  
0085, 0207, 0208  
LXI  
Lloyds  
0029  
White Westinghouse  
Yamaha  
0492  
Logik  
0101  
0048, 0059  
MEI  
0064  
Zenith  
0045, 0046, 0121, 0492  
MGA  
0072, 0269  
0269  
MGN Technology  
MTC  
SETUP CO DES FO R VCR  
CÓDIGOS DE PROGRAMACIÓN PARA VIDEOCASETERA.  
CODES DE PROGRAMMATION DU MAGNÉTOSCOPE.  
0029, 0269  
0307  
Magnasonic  
Magnavox  
Magnin  
0029, 0064, 0068, 0110*  
0269  
Admira  
0077, 0238  
Adventura  
Aiko  
0029  
Marantz  
Marta  
0064, 0110  
0066  
0307  
Aiwa  
0029, 0066  
Matsushita  
Memorex  
0064, 0191  
America Action  
American High  
Asha  
0307  
0029, 0064, 0066, 0068, 0076,  
0077, 0133, 0238, 0269, 1191  
0064  
0269  
Minolta  
Mitsubishi  
Motorola  
Multitech  
NEC  
0071  
Audiovox  
Beaumark  
Bell & Howell  
Broksonic  
CCE  
0066  
0072, 0077, 0096  
0064, 0077  
0029, 0101  
0096, 0133  
0066  
0269  
0133  
0031, 0150, 0213, 0238  
0101, 0307  
Nikko  
* Default code  
Calix  
0066  
11  
12  
 
Noblex  
Olympus  
Optimus  
Orion  
0269  
SETUP CO DES FO R CABLE  
0064  
CÓDIGOS DE PROGRAMACIÓN PARA CABLE  
CODES DE PROGRAMMATION DU CÂBLORÉCEPTEUR  
0066, 0077, 0133, 0191, 1191  
0031, 0213, 0238  
ABC  
0032, 0036, 0037, 0043, 0046  
Panasonic  
Penney  
Pentax  
0064, 0191, 0254, 1191  
Americast  
Archer  
0928  
0064, 0066, 0071, 0269  
0826  
0071  
Bell & Howell  
Bell South  
Contec  
0043  
Philco  
0064, 0238  
0928  
Philips  
0064, 0110  
0048  
Pilot  
0066  
Emerson  
Everquest  
Gemini  
0826  
Pioneer  
Profitronic  
Proscan  
Protec  
0096  
0044  
0269  
0044, 0826  
0305, 0505, 0839  
0173  
0089  
General Instrument  
GoldStar  
Goodmind  
Hamlin  
0101  
Pulsar  
0068  
0826  
Quasar  
RCA  
0064, 0191, 1191  
0049  
0064, 0071, 0077, 0089, 0269  
Hytex  
0036  
Radio Shack  
Radix  
0029  
0066  
0066  
Jasco  
0044  
Jerrold  
0032*, 0041, 0043, 0044,  
0305, 0505, 0839  
Randex  
Realistic  
Magnavox  
Memorex  
Oak  
0056  
0029, 0064, 0066, 0076, 0077,  
0133  
0029  
Runco  
STS  
0068  
0036, 0048  
0029, 0136  
0029  
0071  
Panasonic  
Paragon  
Philips  
Samsung  
Sanky  
Sansui  
Sanyo  
Scott  
0074, 0269  
0068, 0077  
0056  
0029, 0096, 0238, 0300  
0076, 0133, 0269  
0072, 0074, 0150, 0213  
Pioneer  
Pulsar  
0173, 0562, 0906  
0029  
Quasar  
0029  
Sears  
0029, 0064, 0066, 0071, 0076,  
0133  
Radio Shack  
Regal  
0044, 0826  
0049  
Semp  
0074  
Runco  
0029  
Sharp  
0077  
Samsung  
Scientific Atlanta  
Signal  
0173  
Shintom  
Shogun  
Singer  
0101  
0037, 0046, 0506, 0906  
0044  
0269  
0101  
Starcom  
Stargate  
Starquest  
Tocom  
0032, 0044  
0044, 0826  
0044  
Sony  
0029, 0061, 0064  
0029, 0064, 0072, 0110  
0029  
Sylvania  
Symphonic  
TMK  
0041  
0269  
Toshiba  
Tusa  
0029  
Teac  
0029  
0044  
Technics  
Teknika  
Thomas  
Toshiba  
Totevision  
Unitech  
Vector  
0064, 0191  
0029, 0064, 0066  
0029  
United Artists  
Viewstar  
Zenith  
0036  
0056  
0029, 0554, 0928  
0072, 0074  
0066, 0269  
0269  
0074  
Video Concepts  
Videosonic  
Wards  
0074  
0269  
0029, 0064, 0071, 0076, 0077,  
0089, 0101, 0110, 0269  
White Westinghouse  
XR-1000  
0238, 0307  
0029, 0064, 0101  
0029, 0068, 0238  
Zenith  
* Default code  
13  
14  
 

Peerless Industries Projector Accessories PAP 113 User Manual
Philips Cell Phone EB GD87 User Manual
Philips DVD Player 3475 User Manual
Philips Indoor Furnishings 25W PAR38 User Manual
Philips Projection Television 9P5511C1 User Manual
Philips Switch SWS3685W 10 User Manual
Philips TV VCR Combo 34PT3225 User Manual
Polaroid Digital Camera i531 User Manual
Poulan Chainsaw 530165555 01 User Manual
Poulan Snow Blower PP5524ESA User Manual